My latest inspiration on diy pipe and drape
One of my favorite things to diy pipe and drape. I am so thrilled to
be here at My Re-Purposed Life to share one of my recent projects. I
I already have one diy pipe and drape in my home. My latest
inspiration came when I found one pipe and drape manufacturer. They pipe and drape kits
were a good size and I knew they would look great . I decided to keep
the design simple so that the Corbels would be the focal point.
For the sides I used two pipe drape. I attached them to a 1 x 12 x
26" board to make the basic frame. I used my Kreg jig to make pocket
holes and glued and screwed them
together. To give the sides some dimension I used 1 x 2's and offset
them so that 3/4" would show on each side of the 1 x 8. I attached with
glue and nailed from the backside.
Then I flipped it upside down and used glue and pocket holes to
attach the top shelf. I used my chop saw to miter cut some beefy trim
for the bottom. I attached it with glue and my nail gun. Lastly I
attached the pipe drape
with Liquid Nails and then screwed a couple screws through the back
side just to make sure they held. When Finishing, I lightly distressed
the edges to reveal the gray pinch pleat curtains.
More From Around the Web
On September 2, 2006, Cleveland rookie Kevin Kouzmanoff hits ...
On September 2, 1996, David Cone of the New York Yankees mak ...
On September 2, 1996, Mike Greenwell of the Boston Red Sox s ...
- 1000 rbi